How much does electrician insurance cost in North Dakota? (2026)

Every dollar figure on this page is a statutory coverage requirement or a filed industry benchmark — not the premium you will pay. What you actually pay depends on your payroll, revenue, claims history, limits and carrier.

Reviewed by Jason Wootton — licensed P&C Insurance Agent (NPN 7694718) Verify ↗
Edited by Justin Marks · Updated July 2025 · Disclosures ↓

Electrician insurance pricing in North Dakota is shaped by the same state-specific bureau loss-cost filings that govern every commercial policy issued in North Dakota. Below: the most-recent North Dakota filings affecting electrician operations, cited to the regulator or bureau filings they came from — primary-source, government-held pricing records. Read the full national context on the Electrician cost guide.

Why North Dakota electrician insurance costs differ from the national average

Budgeting for electrician insurance in North Dakota begins with the state's licensing and coverage rules rather than a single premium. Anyone who contracts electrical work must hold a license from the North Dakota State Electrical Board, and a contracting master must file a certificate of liability insurance with policy limits of at least $500,000 before the board will issue that license. Add mandatory workers' compensation through the state fund and a Secretary of State contractor license once a job crosses $4,000, and your cost of operating in North Dakota is shaped far more by these statutory requirements than by any one quote.

North Dakota-specific FAQs

Do I need a license to perform electrical work in North Dakota?

Yes. The North Dakota State Electrical Board licenses electricians, and anyone contracting electrical work must hold the appropriate master, journeyman, or Class B credential, and a contracting master must also file a certificate of liability insurance before the board issues the license.

Is workers' compensation mandatory for a small electrical business in North Dakota?

Yes. WSI is the sole workers' compensation provider in the state, and North Dakota law requires coverage before you hire your first employee. A true solo owner with no employees should confirm their own status directly with WSI.

How much liability insurance does North Dakota require for an electrical contractor?

A contracting master must provide a Certificate of Liability Insurance with policy limits of at least $500,000 before the State Electrical Board issues the license. Many electricians carry higher limits to satisfy customer or general-contractor contract terms.

When do I also need a Secretary of State contractor license?

When the cost, value, or price of a single job exceeds $4,000, you must hold a North Dakota contractor license in addition to your electrical license. The class (A through D) depends on the dollar value of the work you take on.

Sources for North Dakota-specific content above:
  1. North Dakota State Electrical Board
  2. ND State Electrical Board — Qualifications for Licensure
  3. ND State Electrical Board — Electrical Contracting Requirements
  4. North Dakota WSI — Employers and Coverage Requirements
  5. North Dakota WSI — About WSI (sole provider)
  6. ND Secretary of State — Contractor Licensing
  7. Insurance Information Institute — Commercial General Liability

Recent rate-filing activity — 1 state filings across 1 commercial line

Commercial carriers can't charge whatever they want — each state's Department of Insurance must approve loss-cost filings before they take effect. These are primary-source, government-held records available on SERFF Filing Access. Cited below: the most-recent active filings affecting electrician operations, each cited to the regulator or bureau filing it came from.

Line State Overall change Effective Filing
WC ND Class-by-class manual rates; range -23.8% to +8.2% YoY Jul 1, 2025 Filing #ND-WSI-MR-2025-26

Source: SERFF Filing Access (filingaccess.serff.com) — the official public-records interface for state Department of Insurance filings. Loss-cost changes shown are the overall bureau-wide change in each state; the actual impact on your quote depends on your class code, payroll, experience modifier, and carrier-specific loss-cost multiplier (LCM). Get a quote for your exact numbers.

National context — Electrician insurance overview

The signature electrician claim is a fire — faulty wiring igniting a client's building — so general liability is the front line, and underwriters weigh your code discipline heavily. The claim that surfaces later is completed operations: a panel or wiring job that fails and starts a fire months or years after handover, which is why completed-operations coverage is the most important GL sub-line for electricians. And because the trade means electrocution, arc-flash burns, shock, and falls, workers' compensation is usually the single largest premium line.

As an industry-typical estimate, a small electrical operation runs roughly $1,500–$8,000+/year across general liability, tools & equipment (inland marine), commercial auto, and payroll-rated workers' compensation — more for commercial/industrial or high-voltage work. No insurance bureau publishes electrician premiums, so every dollar here is an estimate; each coverage fact is sourced to a named authority (III, IRMI, OSHA, NFPA, NCCI). Use the calculator below, then get a real quote in 5 minutes.

National benchmark figures

Published cost ranges for Electrician insurance — useful as a national baseline against which the North Dakota filings above signal local direction.

Electrical fire
$1.6B/yr U.S.
NFPA attributes ~31,650 home fires, 430 deaths, and $1.6B in property damage a year to electrical distribution & lighting equipment — the leading cause of home-fire property damage. NFPA
Completed operations
Fire after handover
A wiring job that ignites months or years after completion is a products-completed-operations claim — the critical electrician long-tail. IRMI products-completed operations
Electrocution
OSHA Focus Four
Electrocution is one of OSHA's four leading causes of construction fatalities; arc-flash and shock drive the workers'-comp line. OSHA Focus Four
Tools & equipment
Inland marine
Meters, drills, wire pullers, and generators are covered off the shop premises by an inland-marine equipment floater. III artisan contractors
Workers' comp class
NCCI 5190 / 5140
Most electricians rate under NCCI class 5190 (wiring within buildings); payroll × class rate is the biggest premium lever. NCCI experience rating

Industry-typical market ranges (national)

Sourced from III, NCCI, ISO, NAIC, BLS, FMCSA, FDA, NRA — government and bureau publications, not from our quote form

Coverage lines an electrician typically carries (industry-typical estimates):

  • General liability: the signature exposure is a fire from faulty wiring — third-party property damage and bodily injury from your on-site work. III commercial general liability.
  • Products-completed operations: a wiring job that fails and ignites after completion — the critical electrician long-tail. IRMI products-completed operations.
  • Workers' comp: electrocution, arc-flash burns, shock, and falls make electrical work an OSHA Focus Four fatal-hazard trade; comp is usually the largest line. OSHA Focus Four.
  • Commercial auto + tools (inland marine): service vans, and the meters/drills/wire pullers/generators stolen from vans or job sites. III artisan contractors.

State variation is large — workers'-comp class rates, licensing/bond rules, and tort environment all vary by state.

For North Dakota-specific direction, see the filed-rate table above.

Industry context — what published research says about Electrician coverage

  • Faulty-wiring fire is the signature electrician claim. Electrical distribution & lighting equipment is the leading cause of home-fire property damage (~$1.6B/yr per NFPA), so GL and your code discipline are what underwriters weigh most. NFPA electrical fires.
  • Completed operations is the electrician long-tail. A wiring job can cause a fire long after you leave, so products-completed-operations coverage — not premises liability — is the sub-line that responds. IRMI products-completed operations.
  • Electrocution and arc-flash make comp the biggest line. Electrocution is an OSHA Focus Four construction killer, and NFPA 70E sets the shock/arc-flash safe-work requirements OSHA relies on. NFPA 70E.
  • A mobile trade needs auto + inland marine. Service vans carrying crews and materials need commercial auto, and your meters, drills, and generators need an inland-marine floater away from the shop. III artisan contractors.

How to lower your electrician insurance cost

General levers that apply nationally — North Dakota operators may also have state-specific levers (e.g. non-subscriber WC, multi-jurisdiction permit consolidation).

Comply with NEC (NFPA 70) & NFPA 70E
A documented electrical-safety-in-the-workplace program signals lower risk to underwriters and cuts both fire and shock claims. NFPA 70E.
Enforce arc-flash PPE & lockout/tagout
De-energize before work; OSHA 1910.333 safe-work practices reduce the shock/burn claims that drive comp premium. OSHA 1910.333.
Run a written safety program (Focus Four)
Target the OSHA Focus Four — especially electrocution and falls — with training and documented procedures to lower your loss frequency. OSHA Focus Four.
Keep permit & inspection discipline
Pulling permits and passing inspections documents code-compliant work and cuts the completed-operations fire claims that hit years later. IRMI products-completed operations.
Raise deductibles + bundle into a BOP
A higher property/inland-marine deductible plus a BOP (III's most cost-effective property+GL base for artisan contractors) lowers premium. III artisan contractors.
Manage your experience mod
Fewer losses lower the NCCI experience mod and your workers'-comp premium over time — the compounding lever. NCCI experience rating.
Supervise apprentices & collect sub COIs
Proper journeyman supervision and certificates of insurance from subs keep uninsured payroll from inflating your premium. III small-business basics.

Get your actual North Dakota quote in 5 minutes

The data above is regulator-filed direction. Your actual North Dakota quote depends on class code, payroll, experience modifier, and the LCM each carrier files.

Get a free North Dakota quote → 📞 Call 1-833-505-2594

More North Dakota rate-filing detail

Get a real North Dakota quote for electrician

The data above shows the regulator-filed direction for North Dakota. For your actual quote — based on payroll, experience modifier, and the LCM each carrier files — request a free quote in under 90 seconds.

Get a free North Dakota quote →

Related guides

Sources cited (national context above)

  1. Home Fires Caused by Electrical Distribution & Lighting Equipment — National Fire Protection Association (NFPA), 2024
  2. Construction Focus Four (electrocution) — Occupational Safety and Health Administration (OSHA), 2024
  3. Electrical Incidents — Causes — Occupational Safety and Health Administration (OSHA), 2024
  4. Safe Electrical Work Practices — 29 CFR 1910.333 — Occupational Safety and Health Administration (OSHA), 2024
  5. NFPA 70E — Electrical Safety in the Workplace — National Fire Protection Association (NFPA), 2024
  6. Insurance for Artisan Contractors — Insurance Information Institute (III), 2024
  7. Workers' Compensation Insurance — Insurance Information Institute (III), 2024
  8. Products-Completed Operations — International Risk Management Institute (IRMI), 2024
  9. Contractors Professional Liability Insurance — International Risk Management Institute (IRMI), 2024
  10. The ABCs of Experience Rating — National Council on Compensation Insurance (NCCI), 2024
Go deeper on Workers' Compensation
📘 Educational, not advice. This state-specific cost page is general educational content reviewed by Jason Wootton, our licensed P&C Insurance Agent (NPN 7694718). Bureau-filed loss-cost changes do not directly equal carrier rate changes — your final quote depends on class code, payroll, experience modifier, schedule credits/debits, and the carrier's LCM. For actual numbers, get a real quote.
An unhandled error has occurred. Reload 🗙