How much does electrician insurance cost in New Hampshire? (2026)

Every dollar figure on this page is a statutory coverage requirement or a filed industry benchmark — not the premium you will pay. What you actually pay depends on your payroll, revenue, claims history, limits and carrier.

Reviewed by Jason Wootton — licensed P&C Insurance Agent (NPN 7694718) Verify ↗
Edited by Justin Marks · Updated January 2026 · Disclosures ↓

Electrician insurance pricing in New Hampshire is shaped by the same state-specific bureau loss-cost filings that govern every commercial policy issued in New Hampshire. Below: the most-recent New Hampshire filings affecting electrician operations, cited to the regulator or bureau filings they came from — primary-source, government-held pricing records. Read the full national context on the Electrician cost guide.

Why New Hampshire electrician insurance costs differ from the national average

New Hampshire licenses electricians statewide through the Electricians' Board at the Office of Professional Licensure and Certification, which issues apprentice, journeyman, master, and high/medium-voltage (over 600-volt) credentials under RSA 319-C, and no electrical installation may be made for compensation unless the person is licensed. What an electrician spends to protect the business here turns less on a single premium rule than on the license tier held and the size of the crew — because New Hampshire workers' compensation law reaches any employer with one or more employees, with no small-business exemption.

  • A tiered state license through the OPLC Electricians' Board — Unlike states that leave electrician licensing to cities, New Hampshire runs it statewide: the Electricians' Board at the Office of Professional Licensure and Certification issues apprentice, journeyman, master, and high/medium-voltage (over 600-volt) credentials, with a five-member board setting the standards under RSA 319-C. The tier an electrician holds governs the scope of work the business can take on and insure (OPLC Electricians' Board).
  • Paid electrical work requires a license — Under RSA 319-C, no electrician installation may be made for compensation unless it is made by a person licensed by the Office of Professional Licensure and Certification. That rule — not a state-set premium — is the baseline cost of operating legally, and general contractors routinely require proof of licensing and liability coverage before a subcontractor pulls a permit.
  • Workers' compensation from the first employee — New Hampshire sets no small-business exemption: RSA 281-A:2 defines an employer as anyone who employs one or more persons, part-time or full-time, so an electrical shop that hires even a single helper must carry workers' compensation. Electrical work carries a higher injury-class rating than clerical trades, which weighs on this line of coverage for the trade.
  • No option to go without — coverage must be secured — An employer subject to the chapter must secure compensation through a commercial policy, approved self-insurance, or another method allowed by RSA 281-A:5. Going without is costly by statute, not by market: RSA 281-A:7 allows a civil penalty of up to $2,500 plus up to $100 per employee for each day of noncompliance, and a purposeful failure is a class B felony.
  • General liability for jobsite property and injury exposure — Electricians run conduit, set panels, and work inside other people's buildings, so commercial general liability covering third-party bodily injury and property damage is standard for the trade. New Hampshire does not make it a condition of the electrician license, but customers and general contractors regularly demand proof of it before awarding work.

New Hampshire-specific FAQs

Who regulates electricians in New Hampshire, and do you need a license?

Electricians are licensed statewide by the Electricians' Board at the Office of Professional Licensure and Certification under RSA 319-C, which issues apprentice, journeyman, master, and high/medium-voltage credentials. No electrical installation may be made for compensation unless the person is licensed.

When does an electrical business need workers' compensation in New Hampshire?

As soon as it has one or more employees. RSA 281-A:2 defines an employer as anyone employing one or more persons, part-time or full-time, and New Hampshire sets no small-business exemption, so even a single helper triggers the requirement.

Does New Hampshire require an electrician to carry liability insurance to be licensed?

The electrician licensing statute, RSA 319-C, does not make general liability insurance or a surety bond a condition of holding the license. In practice, general contractors and property owners routinely require a subcontractor to carry general liability before awarding work.

What happens if a New Hampshire employer does not carry workers' compensation?

Under RSA 281-A:7 an employer that fails to secure coverage faces a civil penalty of up to $2,500 plus up to $100 per employee for each day of noncompliance, people who control disbursements can be held personally liable, and a purposeful failure is a class B felony.

Sources for New Hampshire-specific content above:
  1. New Hampshire OPLC — Electricians' Board
  2. RSA 319-C — Electricians (Licensing)
  3. RSA 281-A:2 — Workers' Compensation Definitions (Employer and Employee)
  4. RSA 281-A:5 — Securing Workers' Compensation Coverage
  5. RSA 281-A:7 — Penalty for Failure to Secure Payment of Compensation
  6. Insurance Information Institute — Commercial General Liability Insurance

Recent rate-filing activity — 1 state filings across 1 commercial line

Commercial carriers can't charge whatever they want — each state's Department of Insurance must approve loss-cost filings before they take effect. These are primary-source, government-held records available on SERFF Filing Access. Cited below: the most-recent active filings affecting electrician operations, each cited to the regulator or bureau filing it came from.

Line State Overall change Effective Filing
WC NH -6.1% voluntary / -5.4% assigned risk; ~66% cumulative over 14 yrs Jan 1, 2026 SERFF #NCCI-134602729

Source: SERFF Filing Access (filingaccess.serff.com) — the official public-records interface for state Department of Insurance filings. Loss-cost changes shown are the overall bureau-wide change in each state; the actual impact on your quote depends on your class code, payroll, experience modifier, and carrier-specific loss-cost multiplier (LCM). Get a quote for your exact numbers.

National context — Electrician insurance overview

The signature electrician claim is a fire — faulty wiring igniting a client's building — so general liability is the front line, and underwriters weigh your code discipline heavily. The claim that surfaces later is completed operations: a panel or wiring job that fails and starts a fire months or years after handover, which is why completed-operations coverage is the most important GL sub-line for electricians. And because the trade means electrocution, arc-flash burns, shock, and falls, workers' compensation is usually the single largest premium line.

As an industry-typical estimate, a small electrical operation runs roughly $1,500–$8,000+/year across general liability, tools & equipment (inland marine), commercial auto, and payroll-rated workers' compensation — more for commercial/industrial or high-voltage work. No insurance bureau publishes electrician premiums, so every dollar here is an estimate; each coverage fact is sourced to a named authority (III, IRMI, OSHA, NFPA, NCCI). Use the calculator below, then get a real quote in 5 minutes.

National benchmark figures

Published cost ranges for Electrician insurance — useful as a national baseline against which the New Hampshire filings above signal local direction.

Electrical fire
$1.6B/yr U.S.
NFPA attributes ~31,650 home fires, 430 deaths, and $1.6B in property damage a year to electrical distribution & lighting equipment — the leading cause of home-fire property damage. NFPA
Completed operations
Fire after handover
A wiring job that ignites months or years after completion is a products-completed-operations claim — the critical electrician long-tail. IRMI products-completed operations
Electrocution
OSHA Focus Four
Electrocution is one of OSHA's four leading causes of construction fatalities; arc-flash and shock drive the workers'-comp line. OSHA Focus Four
Tools & equipment
Inland marine
Meters, drills, wire pullers, and generators are covered off the shop premises by an inland-marine equipment floater. III artisan contractors
Workers' comp class
NCCI 5190 / 5140
Most electricians rate under NCCI class 5190 (wiring within buildings); payroll × class rate is the biggest premium lever. NCCI experience rating

Industry-typical market ranges (national)

Sourced from III, NCCI, ISO, NAIC, BLS, FMCSA, FDA, NRA — government and bureau publications, not from our quote form

Coverage lines an electrician typically carries (industry-typical estimates):

  • General liability: the signature exposure is a fire from faulty wiring — third-party property damage and bodily injury from your on-site work. III commercial general liability.
  • Products-completed operations: a wiring job that fails and ignites after completion — the critical electrician long-tail. IRMI products-completed operations.
  • Workers' comp: electrocution, arc-flash burns, shock, and falls make electrical work an OSHA Focus Four fatal-hazard trade; comp is usually the largest line. OSHA Focus Four.
  • Commercial auto + tools (inland marine): service vans, and the meters/drills/wire pullers/generators stolen from vans or job sites. III artisan contractors.

State variation is large — workers'-comp class rates, licensing/bond rules, and tort environment all vary by state.

For New Hampshire-specific direction, see the filed-rate table above.

Industry context — what published research says about Electrician coverage

  • Faulty-wiring fire is the signature electrician claim. Electrical distribution & lighting equipment is the leading cause of home-fire property damage (~$1.6B/yr per NFPA), so GL and your code discipline are what underwriters weigh most. NFPA electrical fires.
  • Completed operations is the electrician long-tail. A wiring job can cause a fire long after you leave, so products-completed-operations coverage — not premises liability — is the sub-line that responds. IRMI products-completed operations.
  • Electrocution and arc-flash make comp the biggest line. Electrocution is an OSHA Focus Four construction killer, and NFPA 70E sets the shock/arc-flash safe-work requirements OSHA relies on. NFPA 70E.
  • A mobile trade needs auto + inland marine. Service vans carrying crews and materials need commercial auto, and your meters, drills, and generators need an inland-marine floater away from the shop. III artisan contractors.

How to lower your electrician insurance cost

General levers that apply nationally — New Hampshire operators may also have state-specific levers (e.g. non-subscriber WC, multi-jurisdiction permit consolidation).

Comply with NEC (NFPA 70) & NFPA 70E
A documented electrical-safety-in-the-workplace program signals lower risk to underwriters and cuts both fire and shock claims. NFPA 70E.
Enforce arc-flash PPE & lockout/tagout
De-energize before work; OSHA 1910.333 safe-work practices reduce the shock/burn claims that drive comp premium. OSHA 1910.333.
Run a written safety program (Focus Four)
Target the OSHA Focus Four — especially electrocution and falls — with training and documented procedures to lower your loss frequency. OSHA Focus Four.
Keep permit & inspection discipline
Pulling permits and passing inspections documents code-compliant work and cuts the completed-operations fire claims that hit years later. IRMI products-completed operations.
Raise deductibles + bundle into a BOP
A higher property/inland-marine deductible plus a BOP (III's most cost-effective property+GL base for artisan contractors) lowers premium. III artisan contractors.
Manage your experience mod
Fewer losses lower the NCCI experience mod and your workers'-comp premium over time — the compounding lever. NCCI experience rating.
Supervise apprentices & collect sub COIs
Proper journeyman supervision and certificates of insurance from subs keep uninsured payroll from inflating your premium. III small-business basics.

Get your actual New Hampshire quote in 5 minutes

The data above is regulator-filed direction. Your actual New Hampshire quote depends on class code, payroll, experience modifier, and the LCM each carrier files.

Get a free New Hampshire quote → 📞 Call 1-833-505-2594

More New Hampshire rate-filing detail

Get a real New Hampshire quote for electrician

The data above shows the regulator-filed direction for New Hampshire. For your actual quote — based on payroll, experience modifier, and the LCM each carrier files — request a free quote in under 90 seconds.

Get a free New Hampshire quote →

Related guides

Sources cited (national context above)

  1. Home Fires Caused by Electrical Distribution & Lighting Equipment — National Fire Protection Association (NFPA), 2024
  2. Construction Focus Four (electrocution) — Occupational Safety and Health Administration (OSHA), 2024
  3. Electrical Incidents — Causes — Occupational Safety and Health Administration (OSHA), 2024
  4. Safe Electrical Work Practices — 29 CFR 1910.333 — Occupational Safety and Health Administration (OSHA), 2024
  5. NFPA 70E — Electrical Safety in the Workplace — National Fire Protection Association (NFPA), 2024
  6. Insurance for Artisan Contractors — Insurance Information Institute (III), 2024
  7. Workers' Compensation Insurance — Insurance Information Institute (III), 2024
  8. Products-Completed Operations — International Risk Management Institute (IRMI), 2024
  9. Contractors Professional Liability Insurance — International Risk Management Institute (IRMI), 2024
  10. The ABCs of Experience Rating — National Council on Compensation Insurance (NCCI), 2024
Go deeper on Workers' Compensation
📘 Educational, not advice. This state-specific cost page is general educational content reviewed by Jason Wootton, our licensed P&C Insurance Agent (NPN 7694718). Bureau-filed loss-cost changes do not directly equal carrier rate changes — your final quote depends on class code, payroll, experience modifier, schedule credits/debits, and the carrier's LCM. For actual numbers, get a real quote.
An unhandled error has occurred. Reload 🗙