How much does framing contractor insurance cost in Florida? (2026)

Every dollar figure on this page is a statutory coverage requirement or a filed industry benchmark — not the premium you will pay. What you actually pay depends on your payroll, revenue, claims history, limits and carrier.

Reviewed by Jason Wootton — licensed P&C Insurance Agent (NPN 7694718) Verify ↗
Edited by Justin Marks · Updated November 2026 · Disclosures ↓

Framing Contractor insurance pricing in Florida is shaped by the same state-specific bureau loss-cost filings that govern every commercial policy issued in Florida. Below: the most-recent Florida filings affecting framing contractor operations, cited to the regulator or bureau filings they came from — primary-source, government-held pricing records. Read the full national context on the Framing Contractor cost guide.

Recent rate-filing activity — 8 state filings across 1 commercial line

Commercial carriers can't charge whatever they want — each state's Department of Insurance must approve loss-cost filings before they take effect. These are primary-source, government-held records available on SERFF Filing Access. Cited below: the most-recent active filings affecting framing contractor operations, each cited to the regulator or bureau filing it came from.

Line State Overall change Effective Filing
WC FL filing on record (magnitude not publicly disclosed) Oct 1, 2026 Filing #FWC 26-037813
WC FL filing on record (magnitude not publicly disclosed) Oct 1, 2026 Filing #FWC 26-035696
WC FL Overall -6.9% adjustment to voluntary rate level Jan 1, 2026 Filing #FLOIR-2025-11-17-WC
WC FL filing on record (magnitude not publicly disclosed) Mar 1, 2025 Filing #FWC 25-003645
WC FL filing on record (magnitude not publicly disclosed) Feb 20, 2025 Filing #FWC 24-108799
WC FL filing on record (magnitude not publicly disclosed) Feb 20, 2025 Filing #FWC 25-002949
WC FL filing on record (magnitude not publicly disclosed) Feb 3, 2025 Filing #FWC 24-108909
WC FL filing on record (magnitude not publicly disclosed) Feb 3, 2025 Filing #FWC 24-104042

Source: SERFF Filing Access (filingaccess.serff.com) — the official public-records interface for state Department of Insurance filings. Loss-cost changes shown are the overall bureau-wide change in each state; the actual impact on your quote depends on your class code, payroll, experience modifier, and carrier-specific loss-cost multiplier (LCM). Get a quote for your exact numbers.

National context — Framing Contractor insurance overview

Framing is elevated, high-injury work, and its insurance reflects that. General liability with products–completed operations is the core — a framing error missed at inspection can surface as a structural defect years later, and construction-defect claims run a 4–10 year statute in most states. Workers' compensation is critical for crews working at height on open joists before fall-protection systems are in place (OSHA fall protection), where nail-gun and fall injuries dominate the claims. Our own quote data shows framing buyers most often request general liability.

As an industry-typical estimate, framing contractors commonly carry $1,000,000 general liability (with completed operations) to get on a general contractor's approved-vendor list, plus workers' comp on payroll. No insurance bureau publishes framing premiums, so every dollar here is an estimate; each fact is sourced to a named authority (OSHA, IRMI, III). Use the calculator below, then get a real quote in 5 minutes.

Industry-typical market ranges (national)

Sourced from III, NCCI, ISO, NAIC, BLS, FMCSA, FDA, NRA — government and bureau publications, not from our quote form

Coverage lines a framing contractor typically carries (industry-typical estimates):

  • General liability with products–completed operations: the framing you install that fails after the job — construction-defect claims surface years later. IRMI completed operations.
  • Fall exposure: elevated work on open joists before fall protection is installed — the trade's defining injury. OSHA fall protection.
  • General liability limits: commonly $1,000,000, required to get on most GCs' vendor lists. III commercial general liability.
  • Workers' compensation: mandatory for a high-injury crew in nearly every state. III workers comp.

Story-height limits, payroll and residential vs. commercial mix are primary rating factors.

For Florida-specific direction, see the filed-rate table above.

Get your actual Florida quote in 5 minutes

The data above is regulator-filed direction. Your actual Florida quote depends on class code, payroll, experience modifier, and the LCM each carrier files.

Get a free Florida quote → 📞 Call 1-833-505-2594

More Florida rate-filing detail

Get a real Florida quote for framing contractor

The data above shows the regulator-filed direction for Florida. For your actual quote — based on payroll, experience modifier, and the LCM each carrier files — request a free quote in under 90 seconds.

Get a free Florida quote →

Related guides

Sources cited (national context above)

  1. Products-Completed Operations — International Risk Management Institute (IRMI), 2024
  2. OSHA Fall Protection — Occupational Safety and Health Administration (OSHA), 2024
  3. Commercial General Liability Insurance — Insurance Information Institute (III), 2024
  4. Workers Compensation Insurance — Insurance Information Institute (III), 2024
📘 Educational, not advice. This state-specific cost page is general educational content reviewed by Jason Wootton, our licensed P&C Insurance Agent (NPN 7694718). Bureau-filed loss-cost changes do not directly equal carrier rate changes — your final quote depends on class code, payroll, experience modifier, schedule credits/debits, and the carrier's LCM. For actual numbers, get a real quote.
An unhandled error has occurred. Reload 🗙