How much does glass contractor insurance cost in North Dakota? (2026)

Recent rate-filing activity — 1 state filings across 1 commercial line

Commercial carriers can't charge whatever they want — each state's Department of Insurance must approve loss-cost filings before they take effect. These are primary-source, government-held records available on SERFF Filing Access. Cited below: the most-recent active filings affecting glass contractor operations, with the real SERFF tracking number for each.

Source: SERFF Filing Access (filingaccess.serff.com) — the official public-records interface for state Department of Insurance filings. Loss-cost changes shown are the overall bureau-wide change in each state; the actual impact on your quote depends on your class code, payroll, experience modifier, and carrier-specific loss-cost multiplier (LCM). Get a quote for your exact numbers.

National context — Glass Contractor insurance overview

The signature glazier claim isn't installing the glass — it's what happens after. A storefront pane, glass railing, or curtain-wall unit that fails or falls once your crew leaves is a completed operations claim, the exposure that most defines this trade. The second is falls: installing storefronts and curtain walls puts crews above 6 feet, where OSHA fall-protection duty (and the injuries behind it) drive both general liability and payroll-rated workers' compensation. Add the high-value glass itself — fragile in transit and until it's set, which is what an installation floater covers — and the code exposure that glass in hazardous locations must be certified safety glazing, and the stack fills out.

As an industry-typical estimate, a small glazing operation runs roughly $1,500–$7,000+/year across general liability, installation floater, commercial auto, and workers' comp — more for high-rise curtain-wall or heavy commercial work. No insurance bureau publishes glazier premiums, so every total here is an estimate; the one hard, filed number is workers' comp: our filed-rate data puts the glazier NCCI class 5462 advisory loss cost at $0.91–$9.78 per $100 of payroll across 17 states. Each coverage fact below is sourced to a named authority (OSHA, IRMI, III, CPSC). Use the calculator, then get a real quote in 5 minutes.

National benchmark figures

Published cost ranges for Glass Contractor insurance — useful as a national baseline against which the North Dakota filings above signal local direction.

Industry-typical market ranges (national)

Sourced from III, NCCI, ISO, NAIC, BLS, FMCSA, FDA, NRA — government and bureau publications, not from our quote form

Coverage lines a glass contractor typically carries (industry-typical estimates):

• General liability incl. completed operations: a glass panel or railing that fails after install is a products-completed-operations claim — the signature glazier exposure. IRMI products-completed operations.
• Workers' compensation: installing storefronts/curtain walls above 6 feet triggers OSHA fall-protection duty; falls and glass lacerations drive comp. Filed class 5462 advisory loss cost runs $0.91–$9.78 per $100 of payroll in our 17-state data. OSHA 1926.501.
• Installation floater (inland marine): high-value glass is fragile in transit and until it's installed — an installation floater covers it during that window. IRMI installation floater.
• Commercial auto: vehicles hauling glass racks need a separate commercial auto policy — a BOP provides no coverage for vehicles. III commercial auto.

State variation is large — comp class rates, tort environment, and license/bond requirements vary by state.

For North Dakota-specific direction, see the filed-rate table above.

Industry context — what published research says about Glass Contractor coverage

• The finished glass is a completed-operations exposure. A pane, railing, or curtain-wall unit that fails or falls after the crew leaves is covered under products-completed operations — confirm it isn't excluded from your GL. IRMI products-completed operations.
• Storefront and curtain-wall work means height. Installing above 6 feet triggers OSHA fall-protection duty; falls and glass lacerations are the injuries that push both GL and workers' comp rates up. OSHA 1926.501.
• High-value glass needs an installation floater. Large custom glass is expensive and fragile in transit and until set; an installation floater (inland marine) covers it through that gap. IRMI installation floater.
• Glass in hazardous locations must be safety glazing. Doors, sidelites, railings, and glazing near walking surfaces must be certified safety glazing under CPSC 16 CFR 1201 — a non-compliant install is a rework and liability exposure. SGCC safety glazing.

How to lower your glass contractor insurance cost

General levers that apply nationally — North Dakota operators may also have state-specific levers (e.g. non-subscriber WC, multi-jurisdiction permit consolidation).

Get your actual North Dakota quote in 5 minutes

The data above is regulator-filed direction. Your actual North Dakota quote depends on class code, payroll, experience modifier, and the LCM each carrier files.

More North Dakota rate-filing detail

• All North Dakota commercial rate filings (every line, every recent filing) — the broader rate-data view for North Dakota
• Rate filings by state — directory of all 47+ states with active filings
• National Rate Change Tracker — every filing across every state, sortable

Get a real North Dakota quote for glass contractor

The data above shows the regulator-filed direction for North Dakota. For your actual quote — based on payroll, experience modifier, and the LCM each carrier files — request a free quote in under 90 seconds.

Related guides

• General Liability glossary entry
• Workers' Comp glossary entry
• BOP glossary entry
• Our sourcing methodology

Sources cited (national context above)

1. Duty to Have Fall Protection — 29 CFR 1926.501 — Occupational Safety and Health Administration (OSHA), 2024
2. Products-Completed Operations — International Risk Management Institute (IRMI), 2024
3. Installation Floater — International Risk Management Institute (IRMI), 2024
4. What Is Safety Glazing? — Safety Glazing Certification Council (SGCC), 2024
5. Safety Standard for Architectural Glazing Materials — 16 CFR Part 1201 — U.S. Consumer Product Safety Commission (CPSC) via GPO, 2023
6. Insurance for Artisan Contractors — Insurance Information Institute (III), 2024
7. Business Vehicle Insurance — Insurance Information Institute (III), 2024