How much does tile contractor insurance cost in Missouri? (2026)

Reviewed by Jason Wootton — licensed P&C Insurance Agent (NPN 7694718) Verify ↗
Edited by Justin Marks · Updated January 2026 · Disclosures ↓

Tile Contractor insurance pricing in Missouri is shaped by the same state-specific bureau loss-cost filings that govern every commercial policy issued in Missouri. Below: the most-recent Missouri filings affecting tile contractor operations, cited to the regulator or bureau filings they came from — primary-source, government-held pricing records. Read the full national context on the Tile Contractor cost guide.

Recent rate-filing activity — 8 state filings across 1 commercial line

Commercial carriers can't charge whatever they want — each state's Department of Insurance must approve loss-cost filings before they take effect. These are primary-source, government-held records available on SERFF Filing Access. Cited below: the most-recent active filings affecting tile contractor operations, each cited to the regulator or bureau filing it came from.

Line State Overall change Effective Filing
WC MO Proposed +1.3% voluntary loss cost increase Jan 1, 2026 SERFF #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477
WC MO per $100 payroll (advisory loss cost) Jan 1, 2026 Filing #NCCI-134646477

Source: SERFF Filing Access (filingaccess.serff.com) — the official public-records interface for state Department of Insurance filings. Loss-cost changes shown are the overall bureau-wide change in each state; the actual impact on your quote depends on your class code, payroll, experience modifier, and carrier-specific loss-cost multiplier (LCM). Get a quote for your exact numbers.

National context — Tile Contractor insurance overview

Tile, terrazzo and marble work carries a trade exposure carriers now underwrite directly: respirable crystalline silica from cutting and grinding. General liability with products–completed-operations covers the installed work that fails after you leave the job, and workers' compensation covers a physical crew — but the silica question is what moves your rate. Shops that document OSHA-compliant wet-cutting under 29 CFR 1926.1153 get coverage without silica exclusions; dry-cutting shops face surcharges or exclusions.

As an industry-typical estimate, a tile contractor commonly needs GL to get on a general contractor's approved-vendor list even where no law mandates it, plus workers' comp on payroll. No insurance bureau publishes tile-contractor premiums, so every dollar here is an estimate; each fact is sourced to a named authority (OSHA, IRMI, III). Use the calculator below, then get a real quote in 5 minutes.

Industry-typical market ranges (national)

Sourced from III, NCCI, ISO, NAIC, BLS, FMCSA, FDA, NRA — government and bureau publications, not from our quote form

Coverage lines a tile / terrazzo / marble contractor typically carries (industry-typical estimates):

  • Silica-aware general liability: respirable crystalline silica from cutting is its own underwriting question; OSHA sets a permissible exposure limit under 29 CFR 1926.1153. OSHA silica standard.
  • Products–completed operations: the installed tile or terrazzo that fails after the job is finished. IRMI completed operations.
  • General liability: third-party injury and property damage on the jobsite — required to get on most GCs' vendor lists. III commercial general liability.
  • Workers' compensation: mandatory for employees in nearly every state. III workers comp.

Dry- vs. wet-cutting practice, payroll and commercial vs. residential mix are primary rating factors.

For Missouri-specific direction, see the filed-rate table above.

Get your actual Missouri quote in 5 minutes

The data above is regulator-filed direction. Your actual Missouri quote depends on class code, payroll, experience modifier, and the LCM each carrier files.

Get a free Missouri quote → 📞 Call 1-833-505-2594

More Missouri rate-filing detail

Get a real Missouri quote for tile contractor

The data above shows the regulator-filed direction for Missouri. For your actual quote — based on payroll, experience modifier, and the LCM each carrier files — request a free quote in under 90 seconds.

Get a free Missouri quote →

Related guides

Sources cited (national context above)

  1. OSHA Respirable Crystalline Silica Standard (29 CFR 1926.1153) — Occupational Safety and Health Administration (OSHA), 2024
  2. Products-Completed Operations — International Risk Management Institute (IRMI), 2024
  3. Commercial General Liability Insurance — Insurance Information Institute (III), 2024
  4. Workers Compensation Insurance — Insurance Information Institute (III), 2024
📘 Educational, not advice. This state-specific cost page is general educational content reviewed by Jason Wootton, our licensed P&C Insurance Agent (NPN 7694718). Bureau-filed loss-cost changes do not directly equal carrier rate changes — your final quote depends on class code, payroll, experience modifier, schedule credits/debits, and the carrier's LCM. For actual numbers, get a real quote.
An unhandled error has occurred. Reload 🗙