How much does tile contractor insurance cost in Ohio? (2026)
Every dollar figure on this page is a statutory coverage requirement or a filed industry benchmark — not the premium you will pay. What you actually pay depends on your payroll, revenue, claims history, limits and carrier.
Tile Contractor insurance pricing in Ohio is shaped by the same state-specific bureau loss-cost filings that govern every commercial policy issued in Ohio. Below: the most-recent Ohio filings affecting tile contractor operations, cited to the regulator or bureau filings they came from — primary-source, government-held pricing records. Read the full national context on the Tile Contractor cost guide.
Recent rate-filing activity — 8 state filings across 1 commercial line
Commercial carriers can't charge whatever they want — each state's Department of Insurance must approve loss-cost filings before they take effect. These are primary-source, government-held records available on SERFF Filing Access. Cited below: the most-recent active filings affecting tile contractor operations, each cited to the regulator or bureau filing it came from.
| Line | State | Overall change | Effective | Filing |
|---|---|---|---|---|
| WC | OH | -1% private-employer rate cut (~$10M aggregate; -50% cumulative since 2019) | Jul 1, 2026 | — |
| WC | OH | per $100 payroll (BWC state-fund base rate) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
| WC | OH | per $100 payroll (BWC state-fund base rate, NOT loss cost) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
| WC | OH | per $100 payroll (BWC state-fund base rate) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
| WC | OH | per $100 payroll (BWC state-fund base rate) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
| WC | OH | per $100 payroll (BWC state-fund base rate) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
| WC | OH | per $100 payroll (BWC state-fund base rate) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
| WC | OH | per $100 payroll (BWC state-fund base rate) | Jul 1, 2025 | Filing #OAC-4123-17-06-2025 |
Source: SERFF Filing Access (filingaccess.serff.com) — the official public-records interface for state Department of Insurance filings. Loss-cost changes shown are the overall bureau-wide change in each state; the actual impact on your quote depends on your class code, payroll, experience modifier, and carrier-specific loss-cost multiplier (LCM). Get a quote for your exact numbers.
National context — Tile Contractor insurance overview
Tile, terrazzo and marble work carries a trade exposure carriers now underwrite directly: respirable crystalline silica from cutting and grinding. General liability with products–completed-operations covers the installed work that fails after you leave the job, and workers' compensation covers a physical crew — but the silica question is what moves your rate. Shops that document OSHA-compliant wet-cutting under 29 CFR 1926.1153 get coverage without silica exclusions; dry-cutting shops face surcharges or exclusions.
As an industry-typical estimate, a tile contractor commonly needs GL to get on a general contractor's approved-vendor list even where no law mandates it, plus workers' comp on payroll. No insurance bureau publishes tile-contractor premiums, so every dollar here is an estimate; each fact is sourced to a named authority (OSHA, IRMI, III). Use the calculator below, then get a real quote in 5 minutes.
Industry-typical market ranges (national)
Sourced from III, NCCI, ISO, NAIC, BLS, FMCSA, FDA, NRA — government and bureau publications, not from our quote form
Coverage lines a tile / terrazzo / marble contractor typically carries (industry-typical estimates):
- Silica-aware general liability: respirable crystalline silica from cutting is its own underwriting question; OSHA sets a permissible exposure limit under 29 CFR 1926.1153. OSHA silica standard.
- Products–completed operations: the installed tile or terrazzo that fails after the job is finished. IRMI completed operations.
- General liability: third-party injury and property damage on the jobsite — required to get on most GCs' vendor lists. III commercial general liability.
- Workers' compensation: mandatory for employees in nearly every state. III workers comp.
Dry- vs. wet-cutting practice, payroll and commercial vs. residential mix are primary rating factors.
For Ohio-specific direction, see the filed-rate table above.
Get your actual Ohio quote in 5 minutes
The data above is regulator-filed direction. Your actual Ohio quote depends on class code, payroll, experience modifier, and the LCM each carrier files.
Get a free Ohio quote → 📞 Call 1-833-505-2594More Ohio rate-filing detail
- All Ohio commercial rate filings (every line, every recent filing) — the broader rate-data view for Ohio
- Rate filings by state — directory of all 47+ states with active filings
- National Rate Change Tracker — every filing across every state, sortable
Get a real Ohio quote for tile contractor
The data above shows the regulator-filed direction for Ohio. For your actual quote — based on payroll, experience modifier, and the LCM each carrier files — request a free quote in under 90 seconds.
Get a free Ohio quote →Related guides
Sources cited (national context above)
- OSHA Respirable Crystalline Silica Standard (29 CFR 1926.1153) — Occupational Safety and Health Administration (OSHA), 2024
- Products-Completed Operations — International Risk Management Institute (IRMI), 2024
- Commercial General Liability Insurance — Insurance Information Institute (III), 2024
- Workers Compensation Insurance — Insurance Information Institute (III), 2024
